24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
3” MECHANISM, WITH CUTTER
FTP-632MCL301/302
■ OVERVIEW
FTP-632MCL/FTP-622DCL/DSL Series is an ultra high speed
line thermal printer driven by 24 VDC, printing on 3-inch wide
paper (80 mm/85 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed
cutter is also available.
FTP-632MCL301
■ HIGHLIGHTS
• Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light
weight of approximately 94 g.
• Low power consumption
The peak current for head driving is approximately 2.9 A (at
80 mm/s printing speed, 50% printing ratio).
FTP-622CU101
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• ESC/POSTM*1 Commands
The commands conform to ESC/POSTM.
• Auto Cutter
Printer with auto cutter (full cut/partial cut) is also available.
• UL Recognized
File No.E171434
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.
FTP-622DCL011
FTP-632MCL301/302
(Continued)
Item
Specifications
Part number
Interface
FTP-632MCL301/302
Centronics (ESC/POSTM), RS232C
24 VDC ± 5%, Voltage
2
Current : average*
(
): Peak
For head
1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
Power supply
For motor
24 VDC ± 5%, 1.0 A maximum
24VDC ± 5%, 1.0 A maximum
5 VDC ± 5%, 0.5 A maximum
123 (W) × 70 (D) × 42 (H) mm (w/cutter)
131 (W) × 89 (D) × 24 (H) mm
approximately 380 g (w/cutter)
For cutter
For logic
Mechanism (cutter)
Interface board
Dimensions
Weight (Mechanism+Cutter)
Mechanism
Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard
driving method)
Wear resistance : 50 km (at 25% printing ratio)
Expected life
Cutter
3 × 105 cuts
3
Operating temperature 0 to +50°C*
Environmental
conditions
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head-up
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
Detection
By microswitch
For front insertion use (80 mm width)
For rear insertion use (85 mm width)
*Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
: FTP-030PU001, FTP-030P0701
: FTP-030P0020, FTP-030P0702
Recommended thermal sensitive paper
: PD150R, PD160R, PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1, AFP-235
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5°C ~+40°C.
3
FTP-632MCL301/302
Mechanism with cutter
3—M 3(FIXING HOLE FROM UPPER SIDE)
MCL301
MCL302
15
±
300
2—M 3 burring (FIXING HOLE FROM BOTTOM SIDE)
63.4
76.8(POSITIONING H0LE)
58.2
117.5
57±1
(60.5)
(78.6)
Note: all dimensions are nominal value.
Unit: mm
4
FTP-632MCL301/302
Interface board
130.8
120.7
116.8
87.6
19.1
5.1
5.1
CN2**
CN5
CN3
4—ø3.6
CN10
CN11*
CN13
5.1
5.1
43.2
86.4
105.4
120.7
*CN11 on FTP-622DCL011/111 & 622DSL011/012/112 only
**CN2 on FTP- 622DSL only
Unit: mm
■ FUNCTION
ITEM
ITEM
1.
2.
3.
4.
5.
6.
7.
Test printing
Paper-out detection
8.
9.
Cutter trouble detection
Motor power save
Paper near end detection
Head-up detection
10.
11.
12.
13.
14.
Mark detection
MCU trouble detection
Power on/off sequence protection
Motor protection
Abnormal temperature detection of thermal head
Blown fuse detection
Abnormal voltage detection of head
Hardware timer
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and
Options.
5
FTP-632MCL301/302
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info.marketing@fceu.fujitsu.com
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (1-408) 745-4970
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
Email: marcom@fcai.fujitsu.com
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 09/2001
6
|
Electro Voice Automobile Alarm CPS 3 User Manual
Extron electronic Projector TLP 710MV User Manual
Fellowes Paper Shredder P 58Cs User Manual
Fisher Paykel Range OR36SDBGX User Manual
Fisher Price Motorized Toy Car M5728 User Manual
Fujitsu Air Conditioner Air Conditioner Wall Mounted Type User Manual
Garland Griddle C0836 60 User Manual
GE Range 164D3333P171 User Manual
Gianni Industries Door GLZ 150 User Manual
Global Machinery Company Cordless Drill DP250LS User Manual