Ei Electronics Smoke Alarm Ei206D User Manual

BATTERY POWERED  
With Digital Display  
Model Ei206D  
Proven sensor - based on electrochemical technology  
Unique easy to replace sensor module  
Battery powered  
Digital display shows CO level  
Memory feature records if CO has been detected  
Easy to use Test/Hush button  
Automatic self diagnostics  
Loud distinct alarm (85 dB(A) minimum at 3 metres)  
Power, alarm and fault indicator lights  
Tamper-proof  
Fast CO test mode  
Kitemarked to BS EN 50291:2001  
5 Year guarantee (limited)  
Product Description  
Operation  
The Ei206D is a Carbon Monoxide (CO) alarm powered by  
a 9V Alkaline battery (supplied).  
The green indicator will flash every minute to indicate  
that the battery supply is healthy.  
The Ei206D uses a proven electrochemical cell type  
sensor which checks CO concentration every 50 seconds.  
All units are individually calibrated and tested in CO gas in  
order to ensure accuracy. In addition, the sensor module  
can be easily changed for a new module at the end of its 5  
year life.  
If CO is detected, the horn will sound and the digital  
display will indicate the level of CO sensed in parts-per-  
million (ppm). The red indicator will also flash.  
The horn will beep and the digital display will show „SF‟  
in the event of a sensor fault. The amber indicator will  
also flash every minute.  
The Ei206D also has a built-in digital display which shows  
the CO level sensed in parts-per-million (ppm).  
The horn will beep and the green indicator will flash  
every minute to indicate that the batteries are depleted.  
The Ei206D is housed in a slimline casing and can be  
easily secured to a wall or ceiling, with a separate base-  
plate and all necessary fixings supplied.  
Memory Feature - when the test button is pressed the  
horn will sound and the digital display will indicate the  
level of CO previously detected in ppm.  
As well as being easy to install and maintain, the alarm  
also has a vitally important memory feature which records  
if CO has been detected whilst the occupier was away.  
The “Test/Hush” button will either silence false alarms  
(if briefly pressed) or perform a unit self test (if pressed  
and held). Note that the alarm cannot be silenced when  
sensing a CO level of 300ppm or above.  
An easy to use Test/Hush button allows the user to check  
that the horn and electronics are working and to silence  
nuisance alarms.  
Shannon Free Zone, Shannon, Co. Clare, Ireland.  
Ph.+353 61 471277 Fx.+353 61 471053  
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.  
Ei206D DataSht RevB  
 

Dyson Vacuum Cleaner DC26 User Manual
Eagle Electronics Fish Finder 502cDF User Manual
Fender eBook Reader PA 100 User Manual
Fisher Price Baby Toy 77702 User Manual
Frigidaire Dishwasher FGID2474QF User Manual
FUNAI CRT Television F4813T User Manual
Fundex Games Games 2633 User Manual
Furuno SONAR B042 004 User Manual
GE Waffle Iron 681131691864 User Manual
Giant Bicycle Cypress DX W User Manual